All later models have these 3/4" bore Lockheed double piston cylinders for the rear brakes. Includes bleed nipple, retaining clip and gasket.
GENUINE AP REAR WHEEL CYLINDER TO 1967 & INNOCENTI
R/H front wheel cylinder for twin leading shoe drum brakes. MK2 on 1967 on with bleed nipple. REQUIRES 37H3833 GASKET x1 when not supplied. These are 0.9375" bore size which is larger than the MK1 type and uae GRK2002 repair kit.
Genuine original AP lockheed L/H front wheel cylinder for twin leading shoe drum brakes for MK2 cars from 1967. Bleed nipple included but requires 37H3833 gasket when not supplied. These are 0.9375" bore size which is larger than the MK1 typeand the repair kit is GRK2002.
First twin leading shoe types from Sept 1964 up to 1967 pre MK2 with 0.8125" bore size. 2 of these per r/h hub. Repair kits for these are 8G8816.Later cars used 0.9375" bore size GWC126.If using on 37H2013 back plates you will need to slightly elongate bolt holes for wheel cylinders as the bolts will not quite fit in.
It doesn't break or wear out, it gets lost. The early steel master cylinder reservoir caps had a tendency to rust on, so this white plastic could be considered an upgrade. Fits pre '76 brake master cylinders and all clutch cylinders.