The original blue rotor arm was fited with a blue cap GDC143 to the turbos and were made stronger by moulding and riveting the contact plate to the arm, so if you are looking for an upgrade on your 45D body distributor this is our alternative. For use on any 45D type as the standard type can break up at high revs where the contact plate is only riveted on.
100% silicon insulation, silicon coated suppressed conductor,braided glass reinforcement,increased working temperature 0f minus 50C to +300 degrees with improved resistance to damp and water, great fitting and spiral bound wire giving instant and greater resonance. 7-8mm and dull colour red.
Allumeur CSI MG B moteur préparé LUCAS 43D sans dépression
Bride collier d'allumeur LUCAS 25D 45D
The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vaccum leak at the carb and stop the advance from working properly. The rubber connector has a 90 degree bend. When in doubt, replace it.